Have a listen
Recorded in Logic. Use headphones for optimal sound quality.
1975 Gibson G3 in excellent condition, Sunburst finish over an Alder body. Aside from the bridge cover and the screw holes on either side of the original holes, it's all original, including the case. Serial: 500057. Weight: 9 lbs 11.5 oz / 4.4 kg. Nut Width: 40 mm. Depth: 21 mm.
The body finish has a few minor scuffs and little patches of wear. The neck and fretboard are really clean, and the frets have plenty of life left in them. The headstock has a few tiny nicks around the edge and some wear from a guitar stand or wall hanger. The truss rod works as it should. This bass has been fully set up in our workshop with low action and a set of D'Addario roundwound strings.
It has an arrow-shaped headstock inspired by the Flying V. The contoured body edge vaguely echoes the SG; its offset horns were clearly reminiscent of other popular makes, as was its bolt-on neck (4-bolt). The strings go through the body, allowing for greater sustain, and this bass definitely has that, along with a superb tone.
The G3 features three single-coil pickups wired in a humbucking configuration. The pickups were designed by Bill Lawrence. The pickup selector works as follows: Forward position activates the front and middle pickups in a humbucking configuration. The back position activates the middle and back pickups in the same manner. The middle position activates all three pickups for what Gibson coined a "buck-and-a-half".
| Condition | Excellent 8.75/10 |
| Case | OHSC |
| Weight | 9 lbs 11.5 oz / 4.4 kg |
| Serial Number |
500057
|
1975 Gibson G3 in excellent condition, Sunburst finish over an Alder body. Aside from the bridge cover and the screw holes on either side of the original holes, it's all original, including the case. Serial: 500057. Weight: 9 lbs 11.5 oz / 4.4 kg. Nut Width: 40 mm. Depth: 21 mm.
The body finish has a few minor scuffs and little patches of wear. The neck and fretboard are really clean, and the frets have plenty of life left in them. The headstock has a few tiny nicks around the edge and some wear from a guitar stand or wall hanger. The truss rod works as it should. This bass has been fully set up in our workshop with low action and a set of D'Addario roundwound strings.
It has an arrow-shaped headstock inspired by the Flying V. The contoured body edge vaguely echoes the SG; its offset horns were clearly reminiscent of other popular makes, as was its bolt-on neck (4-bolt). The strings go through the body, allowing for greater sustain, and this bass definitely has that, along with a superb tone.
The G3 features three single-coil pickups wired in a humbucking configuration. The pickups were designed by Bill Lawrence. The pickup selector works as follows: Forward position activates the front and middle pickups in a humbucking configuration. The back position activates the middle and back pickups in the same manner. The middle position activates all three pickups for what Gibson coined a "buck-and-a-half".
| Condition | Excellent 8.75/10 |
| Case | OHSC |
| Weight | 9 lbs 11.5 oz / 4.4 kg |
| Serial Number |
500057
|
Have a listen
Recorded in Logic. Use headphones for optimal sound quality.